WEBVTT

00:00:00.090 --> 00:00:03.569
Records administration starts with finding the correct controls.

00:00:04.000 --> 00:00:08.000
In the Records area, open All records and choose Manage.

00:00:08.409 --> 00:00:11.470
The expanded menu contains Settings and Definitions.

00:00:11.859 --> 00:00:16.090
Settings holds department-level values; Definitions lets you inspect

00:00:16.090 --> 00:00:17.850
the forms and their own policies.

00:00:18.239 --> 00:00:19.370
Begin with Settings.

00:00:19.770 --> 00:00:23.670
This example uses the fictional Firehouse fifty-one training department,

00:00:23.940 --> 00:00:26.979
so the practice changes stay with a separate training environment.

00:00:27.229 --> 00:00:31.469
On Records Settings, Default lifecycle preset for department definitions

00:00:31.469 --> 00:00:33.270
currently shows Quick Entry.

00:00:33.700 --> 00:00:36.410
Review due, in hours, is seventy-two.

00:00:36.970 --> 00:00:39.500
Record those baseline values before practicing.

00:00:40.019 --> 00:00:44.099
The displayed help says locked definitions retain their own lifecycle.

00:00:44.490 --> 00:00:48.659
It also says a definition-level deadline override takes precedence

00:00:48.730 --> 00:00:50.159
over the department deadline.

00:00:50.640 --> 00:00:55.009
This is an administrative review interval; the screen explicitly distinguishes

00:00:55.009 --> 00:00:56.640
it from a statutory deadline.

00:00:57.109 --> 00:01:00.780
Check the actual definition policy as well as this department form

00:01:00.810 --> 00:01:02.440
when planning a review process.

00:01:02.619 --> 00:01:07.299
For this exercise, select Review Required in Default lifecycle preset

00:01:07.299 --> 00:01:12.520
for department definitions, then enter forty-eight in Review due, in hours.

00:01:12.860 --> 00:01:15.139
Both prepared values are visible together.

00:01:15.570 --> 00:01:18.879
Forty-eight hours is the training example, not a recommended

00:01:18.879 --> 00:01:20.410
deadline for every department.

00:01:20.799 --> 00:01:24.010
Choose an interval that matches your own review responsibilities.

00:01:24.449 --> 00:01:28.029
At this point the form is prepared but has not yet been saved.

00:01:28.160 --> 00:01:30.390
Scroll to the bottom of Records Settings.

00:01:30.820 --> 00:01:34.179
Save and Cancel are visible below the other settings sections.

00:01:34.560 --> 00:01:38.000
Review the intended change, then choose Save once.

00:01:38.420 --> 00:01:41.430
Typing a value into a field only prepares the form.

00:01:41.840 --> 00:01:44.940
The returned page and a fresh page load give you a separate

00:01:44.940 --> 00:01:48.020
check that the intended values were accepted and retained.

00:01:48.189 --> 00:01:51.310
The returned page displays Records settings saved.

00:01:51.729 --> 00:01:56.930
The lifecycle field shows Review Required, and the review deadline shows forty-eight.

00:01:57.449 --> 00:02:01.290
Compare both saved values with the two values you intended to change.

00:02:01.639 --> 00:02:05.309
A success notice helps, and inspecting the fields confirms which

00:02:05.309 --> 00:02:07.069
configuration is now displayed.

00:02:07.199 --> 00:02:11.509
Reopening Records Settings shows Review Required and forty-eight hours again.

00:02:11.989 --> 00:02:14.330
This is a fresh page load after the save.

00:02:14.660 --> 00:02:17.809
It confirms that the department form retained those values.

00:02:18.279 --> 00:02:21.649
The next check is the policy on existing record definitions.

00:02:21.950 --> 00:02:25.890
A saved department value alone does not tell you the lifecycle shown by

00:02:25.929 --> 00:02:27.929
every form that personnel can use.

00:02:28.130 --> 00:02:31.099
Return to All records and expand Manage again.

00:02:31.599 --> 00:02:35.179
Choose Definitions from this menu to inspect the record forms.

00:02:35.599 --> 00:02:38.790
This keeps the department settings check separate from the definition

00:02:38.790 --> 00:02:42.689
check, while giving administrators a repeatable route to both screens.

00:02:42.799 --> 00:02:46.480
The Definitions table includes Owner, Published version and

00:02:46.480 --> 00:02:48.060
Lifecycle preset columns.

00:02:48.530 --> 00:02:51.390
Run and Training are marked Product, locked.

00:02:51.770 --> 00:02:54.529
Both show published version one and Quick Entry.

00:02:54.930 --> 00:02:57.430
This screen was captured while the department form had the

00:02:57.430 --> 00:02:59.539
saved Review Required value.

00:02:59.949 --> 00:03:04.289
The locked definitions still show their own Quick Entry policy, matching the scope

00:03:04.289 --> 00:03:06.140
described in the department settings help.

00:03:06.619 --> 00:03:09.080
Read the row you actually intend to use.

00:03:09.270 --> 00:03:13.919
In the same table, locate Training Only, Community software exercise.

00:03:14.330 --> 00:03:18.399
Its owner is Department, and its lifecycle column shows Quick Entry.

00:03:18.800 --> 00:03:20.340
The row has an Edit link.

00:03:20.750 --> 00:03:23.380
Choose Edit to inspect that definition version.

00:03:23.880 --> 00:03:28.179
Use the definition name and owner to distinguish a department-owned form from

00:03:28.179 --> 00:03:32.189
a locked product form before deciding which policy you are maintaining.

00:03:32.379 --> 00:03:35.750
The definition page identifies version one as Published.

00:03:36.119 --> 00:03:40.280
Its notice says this version is published and read-only, and it

00:03:40.280 --> 00:03:42.729
offers Open new draft for changes.

00:03:43.080 --> 00:03:47.719
Lifecycle preset still shows Quick Entry on this existing published definition.

00:03:48.130 --> 00:03:51.289
Review the version you are inspecting before planning an edit.

00:03:51.699 --> 00:03:56.369
This walkthrough reads the existing policy; it leaves Open new draft available

00:03:56.369 --> 00:03:58.830
for a separate definition-change exercise.

00:03:59.030 --> 00:04:03.220
Farther down the same definition page are Reviewer roles, Approver

00:04:03.220 --> 00:04:05.999
roles and Review due, in hours.

00:04:06.320 --> 00:04:09.020
The review deadline field is blank in this example.

00:04:09.449 --> 00:04:12.890
These are definition-specific controls to inspect when deciding

00:04:12.890 --> 00:04:14.609
how that form should be reviewed.

00:04:15.039 --> 00:04:17.980
The department settings help explains the precedence of a

00:04:17.980 --> 00:04:20.060
definition-level deadline override.

00:04:20.400 --> 00:04:23.970
Keep role assignments, the selected lifecycle and the review

00:04:23.970 --> 00:04:27.390
interval consistent with the people responsible for the process.

00:04:27.689 --> 00:04:30.359
This inspection does not change the published version.

00:04:30.560 --> 00:04:33.280
Return to Records Settings after the exercise.

00:04:33.740 --> 00:04:37.579
The prepared restoration selects Quick Entry and enters seventy-two

00:04:37.619 --> 00:04:39.249
hours, matching the baseline.

00:04:39.679 --> 00:04:42.889
Compare both fields with the values you recorded at the start.

00:04:43.440 --> 00:04:46.689
Restoring a practice change should be an intentional configuration

00:04:46.689 --> 00:04:51.230
decision, using the same review of the complete form as the original change.

00:04:51.360 --> 00:04:54.209
Use the same Save action at the bottom of the settings

00:04:54.209 --> 00:04:55.910
form to apply the restoration.

00:04:56.410 --> 00:04:59.920
The original values are still only prepared until you save them.

00:05:00.339 --> 00:05:03.460
Verify the returned result before ending the exercise.

00:05:03.659 --> 00:05:05.619
Records settings saved appears again.

00:05:06.040 --> 00:05:10.100
Quick Entry and seventy-two hours are now displayed on the returned form.

00:05:10.520 --> 00:05:13.919
The demonstration has restored its original department defaults.

00:05:14.280 --> 00:05:18.490
No record was submitted for review, and no definition version was edited or

00:05:18.490 --> 00:05:20.729
published during this settings exercise.

00:05:20.909 --> 00:05:25.110
A final reopening still shows Quick Entry and seventy-two hours.

00:05:25.660 --> 00:05:29.930
Use this same baseline, save, reopen and definition-inspection

00:05:29.930 --> 00:05:31.369
process for your department.

00:05:31.850 --> 00:05:36.669
Security teams can organize post-report review, wildland contractors can review

00:05:36.699 --> 00:05:41.349
crew-support records, and industrial teams can coordinate exercise documentation.

00:05:41.859 --> 00:05:45.480
Community paramedicine and mental health teams can define appropriate

00:05:45.519 --> 00:05:48.990
outreach review responsibilities, while search-and-rescue teams can

00:05:48.990 --> 00:05:51.009
review mission-support documentation.

00:05:51.519 --> 00:05:54.510
Fire and E M S departments can use the same checks.

00:05:54.940 --> 00:05:59.519
Set a clear policy, then verify the specific form personnel will use.
